|
|
 |
"BIG BRUTE" HEAVY-DUTY FRAME SHACKLE BRACKETS
WP Warrior Products
Powder-coat finish for great-looks and long-lasting corrosion resistance Upgrades the weak link in your vehicle's suspension Available for front or rear Great for off road pounding and rock crawling. Original light-duty brackets can unwrap and lead to trouble. These maximum strength shackle brackets replace the original at an affordable price and also offer durability (MIG welding with 2 extra braces, heavy steel and precision forming).
More Information ... |
|
 |
"EYEBROWS" FOR FRONT HEADLIGHTS
APC
These high quality ABS plastic eyebrows give that true import performance look to your vehicle. 100% ABS Plastic Simple installation, no drilling, bolts right on Paintable
More Information ... |
|
 |
"FAT BOB" STYLE IGNITION SWITCH
Fits '73-on Harley-Davidson FL, FXST and FXWG models with "Fat Bob" gas tank Replaces OEM #71501-73 Easy-to-install chromed steel switch Includes 2 keys, caps for early and later models, mounting hardware and instructions.
More Information ... |
|
 |
"JEWELED" HEADLIGHT VISOR
Polished, rustproof stainless steel visor. Curved to mount easily on 7" or 9" diam. headlight under rim. Ruby-red glass ornament "glows" with the refracted light from headlight. Beautiful and reminds you when headlight has been left on.
More Information ... |
|
 |
"LIVE TO RIDE, RIDE TO LIVE—RIDE FREE" MIRRORS
Chrome eagle on the back of mirror "Live to Ride, Ride to Live" motto, eagle and "Ride Free" inscription Nonglare, filtered flat mirror hoursing is 5-1/8" x 3-5/8" Mirror head can be slid up or down the chrome plated 3/8", 7-1/2" long steel stem Secure mirror to stem with screw using Allen wrench (included) For Honda, Kawasaki, Suzuki and Yamaha cycles Sold in pairs.
More Information ... |
|
 |
"MIRACLE" PAINT PERMANENT RUST AND CORROSION INHIBITOR
Dries ultra-hard, works on all metals Completely sandable, can be used as a filler Impervious to gasoline, grease, oil, battery acid and anti-freeze. Apply with brush or spray right over rust to stop further corrosion and completely seal all metals. Dries to a super-hard finish in 4 to 6 hours. So strong it can even be used with fiberglass or poly matting to seal gas tanks! Ultraviolet-sensitivemust be second-coated with any other paint to protect finish from sunlight.
More Information ... |
|
 |
"O" RING KICK PEDALS
Chromed-plated, custom-style steel pads feature black "O" rings for added styling and sure-footed starts Choose round or wide pedal For Harley-Davidson cycles "O" ring section is approx. 4"L with raised ridge on end. Replace original pedals using original mounting hardware. Round Pedal: Approx. 1-1/2" diam. Wide Pedal: Approx. 2-1/4"W at mounting point. Swivel-type mount.
More Information ... |
|
 |
"O" RING SHIFTER PEG
Perfect replacement for all worn screw-in shifter pegs Approx. 2"L x 1" diam. with 1/2"L screw-in stud For Harley-Davidson models Chrome-plated peg with black "O" rings.
More Information ... |
|
 |
1,000,000-CANDLEPOWER STROBE LIGHTS
North American Signal
Magnetic or permanent mount Flashes 60 times per minute, in all directions Waterproof Lexan dome resists weather and temperature extremes Rubber base seals tight, absorbs vibration Light's circuitry uses advanced computer-grade components for dependable, long life. Reverse polarity and shut-off protection. Easy-replace tube lasts up to 1,000 hours, replacement available. Mounts securely on top of vehicle, plugs into cigarette lighter. 4-1/2"H, 5" diam. base. Coil power cord included. 12-24 volt, 1/2-amp. Current draw. Magnet-mount light includes 12-ft. coil cord and plugs into cigarette lighter. Permanent-mount light hardwires into electrical system. Lens colors available: red, amber, blue, clear.
More Information ... |
|
 |
1,000-PC. WIRING TERMINAL CENTER
Make strong solder-less connections quickly Exceeds UL or SAE safety standards Our biggest terminal centerfor automotive, marine, home, electronic. All terminals except high-temperature and female disconnects are pure copper with electro-tin plating. High-temperature terminals are nickel-plated steel to withstand extreme heat. Female disconnects are brass. Kit includes both insulated and non-insulated terminals. Insulated types eliminate taping and are color coded for quick identification of wire size. Included pieces: 435 Ring terminals. For permanent connections. Non-insulated terminals for 22-18 gauge wire (stud sizes #4, 6, 8, 10 and 1/4") and 16-14 gauge wire (sizes #4, 6, 8, 10 and 1/4" and 5/16"). Insulated terminals for 22-18 and 16-14 gauge wire (sizes #6, 8, 10) and 12-10 gauge wire (size #10). Also includes non-insulated high-temperature terminals for household use in places with excessive heat (up to 900 degrees F). For 16-14 gauge wire (#6, 8). 235 Spade terminals. For connection without removing screw or nut. Includes non-insulated and insulated terminals for 22-18 and 16-14 gauge wire (sizes #6, 8, 10) and insulated terminals for 12-10 gauge wire (size #10). 155 Disconnects. Plug-ins for fast connection and disconnection. With piggyback connectors. Includes non-insulated disconnects for 22-18 gauge wire (female with .110", .187" and .250" tab widths, male with .250" tab width) and 16-14 gauge wire (.187" and.250" female, .250" male). Insulated disconnects for 22-18 and 16-14 gauge wire (.187" and .250" female, .250" male). Twenty .250" adapters. Non-insulated. 3 types. Male tab adapters to adapt standard screws to male disconnects. Piggyback adapters split one wire into two. Fuse taps allow quick take-off from auto fuse blocks for adding accessories. 29 In-line butt connectors. Insulated. For joining wires without soldering or taping. Includes connectors for 22-18, 16-14, 12-10 gauge wire. 11 Bullets and receptacles, pigtails and line taps. Bullets and receptacles slice wires for fast connection and disconnection. For 16-14 gauge wire. Insulated. Closed-end pigtails permanently joining multiple wires. Nylon insulated cap ensures trouble-free, fully insulated dead-end splices. For 16-14 gauge wire. Quick-splice and taps take off an extra hot line quickly without stripping wires. Fast hook-up for auto radios, CBs, trailer lights. Also for house wiring. For 18-14 gauge wire. 15 Twist-on wire nuts. For 22-18, 20-16 and 22-14 gauge wire. 36 Cable ties. 3-1/2" long. 18 Grommets. Protect wire through metal panels. Sizes: 1/4" hole, 1/8" I.D., 5/16" hold, 3/16" I.D., 3/8" hold, 1/4" I.D. 40 Nylon cable clamps. Safely mount wires and wire bundles away from excessive heat and moving parts. Includes 1/8", 3/16", 1/4" and 1/2" diam. clamps. 6 Test clips. With mounting screw. Includes 1" and 2" lengths for 22-12 gauge wire. Organizer/storage box. Compartmentalized clear high-impact plastic box has hinged lid. Appro
More Information ... |
|
 |
1-, 2- AND 3-DRAWER HEAVY-DUTY TOOL CHESTS
Torin Big Red
Heavy-gauge steel with baked-on red enamel finish (drawers are black) Safely hold your tools or carry them easily to the job Strong, solid construction to last for years. Priced to fit just about any budget.
More Information ... |
|
 |
1-3/4" OD STAINLESS STEEL RADIATOR HOSES WITH END CAPS
Flexicool
Kit includes one radiator hose and 2 matching hose end caps (attached to hose) The end of ugly rubber hoses—hot finish/color brightens your under-hood area Shapes into any configuration to create a unique look and aids in cooling Withstands vibration. Corrosion-resistant 300 series stainless hose with 6061-T6 billet aluminum end caps.
More Information ... |
|
 |
1-3/4"OD STAINLESS STEEL RADIATOR HOSES
Flexicool
Can be cut to any length The end of uggly rubber hoses—hot finish/color brightens your under-hood area! Shapes into any configuration to create a unique look and aids in cooling Withstands vibration. Corrosion-resistant 300series stainless steel hose. Order matching/contrasting 6061-T6 billet aluminum hose end caps for a complete look (sold separately; 20212G).
More Information ... |
|
 |
1-PC. FIBERGLASS FRONT ENDS FOR CARS
Rugged to absorb drag strip stress and strain! Front ends weigh less than stock and improve strip or street performance Lightweight for increased performance Designed to align perfectly with stock body. Headlight and grille areas may be cut out and made functional if desired for street use ( A indicates front end is already cut out and requires use of original grilles or screening to fill in). Original chrome accessories may also be used. Include hinge kit with mounting arms and brackets to allow entire front end to be tilted forward for easy access to engine (use of hinge kit prohibits use of front bumper). Gel-coat finished, needs sanding and priming before painting. Require hood hold-down pin set (not included). Not mailable. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by freight truck.
More Information ... |
|
 |
1-PIECE SIDE/TAIL SECTION PANELS
Maier Mfg
1/8" thick black high-density ABS plastic molded to original specifications Custom-fit for left or right side For Honda, Suzuki and Yamaha models Can also be painted. Bolt on using existing hardware. Special moly fasteners also included.
More Information ... |
|
|
